The Primary Transit Network and its feeder routes (2025)

Update: July 9, 2024

On June 27, 2024, Winnipeg City Council approved the Primary Transit Network Service Implementation Plan and a number of recommendations.

As a result, the Primary Transit Network and its feeder routes will launch on June 29, 2025.

This exciting change will transform transit service in Winnipeg.

You can view the system map for the new network online. It shows each of the routes that will launch on June 29, 2025, replacing the network of routes we currently have. This network will not be revised again before launch.

The schedules for each route in the new network will be available about two months before launch.

We’re grateful to everyone who participated in the years-long process to get us here. And we’re excited to share more information about the network in the leadup to the launch.

In the meantime, you can read this page to learn about the concepts behind the new network.

If you have accessibility needs and require information in another format, please contact 311 for assistance.

  • Approved system map
  • Approved implementation plan

Update: June 5, 2024

Winnipeggers want a transit system that is more:

  • frequent,
  • efficient,
  • reliable, and
  • accessible.

The proposed Primary Transit Network and its feeder routes are designed with those goals in mind.

We're grateful to everyone who participated in an information session in February/March. We’re also grateful to those who submitted comments online.

Responses shared with us during the February/March campaign were carefully considered. In some cases, we made changes. In other cases, route designs have stayed the same

We’ve now finalized our recommended design and a plan to launch the new network.

We thank everyone who shared questions or concerns about the proposed network design.

Public information events

Public information event were held between Feb. 26 and March 2. You can view the presentation boards that were on display as a PDF, or learn about the network by reading through this page.

The Primary Transit Network and its feeder routes vs. our current route network

Winnipeg is ready for a full redesign of our transit network – it will be the first ever.

The routes we have now grew over time with the city. They’re long, with plenty of twists and turns. Most wind their way back and forth between outer neighbourhoods and downtown, where traffic is heaviest. This makes staying on schedule more challenging. And that makes service less reliable.

The network we’re implementing is more like a grid. The Primary Transit Network is the spine, while feeder routes connect you to the spine or help you travel shorter distances within communities.

This system keeps buses moving more reliably. It will also free up capacity so we can increase frequency where demand is highest.

What is the Primary Transit Network?

The Primary Transit Network is made of: Rapid Transit Lines, Frequent Express Lines, Frequent Lines and Direct Lines.

Image

The Primary Transit Network and its feeder routes (1)

All Primary Lines are simpler, straighter, and have fewer bus stops than many current routes. Simple, straight lines with fewer stops mean transit can run faster and more frequently, so people wait less and reach their destination faster.

At the busiest times of day, Primary Lines will arrive often enough that you won’t need to follow a schedule.

All Primary Transit Network Lines are classified by:

  • How frequent service is
  • How far stops are from one another
  • Whether or not they use dedicated rapid transit infrastructure for a significant portion of the routes

Rapid Transit Lines and Frequent Express Lines have the highest service frequencies and longest distances between stops. The difference is Rapid Transit Lines already use dedicated rapid transit infrastructure. Frequent Express Lines are located where rapid transit infrastructure will be built in the future.

Frequent Lines have the next most frequent service, followed by Direct Lines. In the future, as Winnipeg continues to invest in transit, Lines may move up in service classes.

What is the feeder route network?

The feeder route network is made up of community and connector routes and On-Request service. It connects to the Primary Transit Network. Feeder routes will avoid congested areas and stay on time more often.

Image

The Primary Transit Network and its feeder routes (2)

Putting it together: types of service

Primary Transit Network

What does it do? Frequent service. Transit-only right of way where needed to bypass congestion and move more quickly across the city

Wait times between buses (core frequencies, longer wait times on branches):

  • Peak: 4-10 minutes
  • Off-peak: 5-10 minutes
  • Night/weekends: 10-30 minutes

How far apart are the stops? 700-1000 metres outside of downtown

What does it do? These lines will be upgraded to Rapid Transit in the future

Wait time between buses:

  • Peak: 5-15 minutes
  • Off-peak: 10-15 minutes
  • Night/weekends: 10-30 minutes

How far apart are the stops? 700-1000 metres in express sections, otherwise 350-500 metres

What does it do? Buses run along major streets to help people travel across the city

Wait times between buses:

  • Peak: 10-15 minutes
  • Off-peak: 10-15 minutes
  • Night/weekends: 10-30 minutes

How far apart are the stops? 350-500 metres

What do they do? Buses run along main streets to help people travel between neighbourhoods

Wait times between buses:

  • Peak: 10-15 minutes
  • Off-peak: 10-20 minutes
  • Night/weekends: 15-30 minutes

How far apart are the stops? 200-500 metres

Feeder Network

What do they do? Connect people to the Primary network and help them move around the city

Wait times between buses:

  • Peak: 15-30 minutes
  • Off-peak: 15-30 minutes
  • Night/weekends: 20-60 minutes

How far apart are the stops? 200-500 metres

What do they do? Help people travel within their neighbourhoods, to nearby services, to connector routes and the Primary Network

Wait times between buses:

  • Peak: 30-60 minutes
  • Off-peak: 30-60 minutes
  • Night/weekends: 30-60 minutes

How far apart are the stops? 200-500 metres

What does it do? Serves new and developing areas and other areas with low demand. Connects people to nearby destinations and other transit services

Wait times between buses: Varies. Generally, 5-20 minutes after booking a trip.

How far apart are the stops? Varies

What do they do? Limited span routes operate only at certain times of the day. This can include express routes

Wait times between buses: Varies. Limited-span routes operate only at certain times of day.

How far apart are the stops? Varies

The proposed network

We invite you to explore the map of the approved network.

Document

WTMP_2025-APPROVED-System-Map_2024-07-05.pdf

If you have accessibility needs and are unable to explore the map in this format, please contact 311 for assistance.

What we heard about the proposed network concept

The concept for the Primary Transit Network and its feeder routes was presented during engagement for the Winnipeg Transit Master Plan.

Image

The Primary Transit Network and its feeder routes (3)

We have since refined the Primary Transit Network and feeder routes. Using feedback from Winnipeggers we focused on:

  • Improving service frequency & reliability
  • Preparing for growth
  • Linking community destinations

Next steps until launch

The Primary Transit Network and its feeder routes will launch on June 29, 2025.

Schedules and trip planning information will be available in April 2025.

Once the detailed schedules are ready, you will be able to find trip information the same ways you can now: by phoning 311 or using trip planning apps like Navigo.

Watch for ads on buses and in the media starting in April 2025.

What comes after launch?

Image

The Primary Transit Network and its feeder routes (4)

The Winnipeg Transit Master Plan proposes an entirely new service network for Winnipeg: The Primary Transit Network and its Feeder Routes

Current stage:Primary Transit Network and feeder routes planning

  • Technical Analysis including scheduling, modelling and fieldwork began in 2022.
  • Engagement with disability groups on communications and promotional planning is currently underway.
  • Public information on routes and service is currently underway.
June 2024 – Report to Council on routes and service
November 2024 – Report to Council on communications and promotional plan
April 2025 - Promotional campaign begins
  • Schedules available on trip planning apps
  • Bus stop signage updated

Target date June 29, 2025:Service begins on Primary Transit Network and feeder routes

2026 and beyond:Annual Service Planning

  • Including service extensions, frequency improvements and network refinements

Target date – before 2045: The Winnipeg Transit Master Plan Long Term Network Plan

Contact

We thank everyone who shared questions or concerns about the proposed network design. We are now working on our final recommended design.

We invite you to sign up to receive updates from the Primary Transit Network project team.

Subscribe for updates

Questions or Concerns? Contact 311.

Frequently asked questions

  • We know Winnipeggers want a transit system that is more accessible, frequent, efficient and reliable
  • ThePrimary Transit Network and its feeder network is designed with those goals in mind
  • ThePrimary Transit Network and its feeder network were shaped by both feedback and technical analysis
  • We’ve made some revisions to the Primary Transit Network and carried out technical analysis to design and finalize the feeder routes
  • Some decisions were made by analyzing streets to determine where bus travel is workable
    • Simply put, buses can travel on some streets, and can’t on others
    • Other factors include if land is available for stops and turnarounds
    • We also chose locations of feeder routes to allow for connections to be made
  • We also looked at where appropriate infrastructure is already in place or can be built in the future

  • The network was shaped by both feedback and technical analysis
  • Your feedback during three rounds of engagement for the Winnipeg Transit Master Plan helped us design the Primary Transit Network.
  • We also made changes based on concerns shared with us during public information sessions in early 2024 .
  • Some decisions were made by analyzing streets to determine where bus travel is workable
    • Simply put, buses can travel on some streets, and can’t on others
    • Other factors include if land is available for stops and turnarounds
    • We also chose locations of feeder routes to allow for connections to be made
  • We also looked at where appropriate infrastructure is already in place or can be built in the future

  • It depends on the passenger and their destination
  • In some cases, passengers will need to transfer from a bus on the feeder network to a bus on the primary transit network to get where they want to go
  • But other passengers will have a new connection to where they want to go with no transfers
  • Likewise, in some cases, the time it takes to get where you need to go will change. Many trips will be more direct, with less waiting time
  • All passengers will have to adjust to a new way of getting to where they need to go

  • We’re committed to improving the accessibility of our network. This is an ongoing process that doesn’t begin or end with the launch of a new transit network
  • We’re pleased to have additional funding to put towards accessibility improvements throughout 2025-27.

  • Our current transit network has routes that wind their way back and forth between outer neighbourhoods and downtown, where traffic is heaviest
  • This contributes to routes running late, especially during peak hours
  • ThePrimary Transit Network is more like a grid
  • Its Lines are straighter with stops that are more spaced out, for efficient travel
  • While routes on the feeder network will often avoid more congested areas
  • This system will keep buses moving more reliably
  • It will also free up capacity so we can increase frequency where demand is highest

  • ThePrimary Transit Network is designed to be more efficient
  • The overall system capacity will be higher than it is today.
  • It will be easier for us to address crowding than it is today.
  • There will still be routes that will be high in demand.

  • We are engaging directly with groups who support and advocate for people with disabilities to ensure we are communicating network changes with accessibility in mind
  • We will be using feedback to create resources that help passengers of all abilities plan trips on the new network.
  • We’re also committed to improving the accessibility of our network. This is an ongoing process that doesn’t begin or end with the launch of a new transit network
  • We’re pleased to have additional funding to put towards accessibility improvements throughout 2025-27
  • We will be upgrading infrastructure at junctions to make transfers more convenient.
  • This can include moving bus stops closer to a crosswalk, which will help passengers with disability affecting mobility.

  • The precise locations of bus stops are to be determined, but how far apart they are is determined by the kind of service:
    • On Rapid and Frequent Express Lines, bus stops will be spread at least 700 metres apart, or about a 10-minute walk
    • On Frequent lines, bus stops will be at least 350 metres apart, or about a five-minute walk
    • On Direct Lines, Community Routes and Connector Routes, bus stops will be at least a 200 metres apart, or about a three-minute walk
  • For the most part, locations of stops on Community and Connector Routes won’t change from where they are located now.
  • Locations of bus stops on the Primary Network are more likely to change. This is because frequent lines have fewer stops for faster service.

  • We will begin upgrading stop infrastructure in early 2025, as well as installing new signage to mark bus stops.
  • Then we will carry out a comprehensive, city-wide communications campaign, so people are prepared to take the bus when we launch.
  • We will launch the Primary Transit Network and its feeder network in summer 2025.The last date most current bus routes will operate is June 28, 2025. The Primary Transit Network and its feeder routes go into service June 29, 2025.

  • We won’t make any immediate changes after we launch, to give us a full year to analyze travel patterns and see what is working and what is not
  • After that, changes to feeder routes will be considered and implemented in a yearly cycle. It’s called the Annual Service Planning Process.
  • The proposed Primary Transit Network will expand in the future, as the city grows and more people ride transit
    • Over time, it will look more and more like the long-term network plan in the Winnipeg Transit Master Plan
  • One benefit of moving to a spine-and-feeder system is that it becomes much easier to make incremental changes to the feeder network
  • That’s because service is segmented between the Primary Lines and Feeder Routes, so making changes in one spot doesn’t have a snowball effect
  • This leeway allows us to be more responsive to changes and growth in neighbourhoods
  • For example, in Southwest Winnipeg, a number of incremental changes have been made to feeder routes since we launched a spine-and-feeder network in Spring 2020
The Primary Transit Network and its feeder routes (2025)

FAQs

The Primary Transit Network and its feeder routes? ›

The Primary Transit Network is the spine, while feeder routes connect you to the spine or help you travel shorter distances within communities. This system keeps buses moving more reliably. It will also free up capacity so we can increase frequency where demand is highest.

What is a feeder bus route? ›

A feeder bus route is designed to take people to a rail station in most cases, and has a route through a residential area with several stops to pick people up. Light passenger loads are expected on feeder routes.

What is the transit network? ›

Transit networks are a spatial representation of bus, rail, and other types of transit routes available in a region. In a transit network, each transit route is coded with links representing the path it follows and nodes representing the stops along the path.

What time do buses stop running in Winnipeg? ›

When do buses run? 365 days a year, usually from 6 a.m. until past midnight; although some routes do not operate seven days a week. Weekday rush hours from 7 a.m. – 9 a.m. and 3:30 p.m. – 5:30 p.m., providing the most service available.

Where is Winnipeg Transit lost and found? ›

Lost Property Office Information

Winnipeg Transit's Lost and Found is located at the Customer Service Centre in the South West Concourse, under Portage and Main.

What is the meaning of feeder bus? ›

Feeder bus services are designed to pick up passengers in a certain locality and take them to a transfer point where they make an onward journey on a trunk service. This can be another bus, or a rail-based service such as a tram, rapid transit or train.

What is the difference between a feeder and a transmission line? ›

In electrical engineering, a feeder line is a type of transmission line. In addition Feeders are the power lines through which electricity is transmitted in power systems. Feeder transmits power from Generating station or substation to the distribution points.

What is the difference between transit and transport network? ›

Information flows through those tubes from one computer to another. This is called IP Transport – the way data moves from one point of the Internet to the other. An IP transit network can be either a Wide Area Network (WAN) like the Internet or a LAN – a Local Area Network.

What is the transit network problem? ›

The problem of designing a set of sequences of stops, called lines or routes, in order to service a commuting population is called the Transit Network Design Problem (TNDP).

How many transit systems are in the US? ›

In total, there are about 6,800 organizations in the U.S. that provide transit services. In 2018, the Federal Transit Administration reported 2,207 transit systems received federal grant money, 928 of which were in urbanized areas and 1,279 in rural areas.

Does Winnipeg have a subway? ›

Winnipeg has no subways or commuter rail system, but it is a stop for Via Rail, Canada's national passenger rail system.

How much is the bus fare in Winnipeg? ›

2024 Fares
Fare TypeFull FareSenior Fare
Cash$3.25$2.75
peggo e-passes
e-cash*$2.90$1.45
24 hour e-pass$10.75$5.40
12 more rows

How late do buses run in Minnesota? ›

Fixed Route service runs seven days a week, all year. Routes begin service as early as 5 AM and end as late as 10:43 PM on weekdays, 7:45 AM to 7:12 PM on Saturdays and 8:45 AM to 6:12 PM on Sundays.

What is the blue line in Winnipeg Transit? ›

BLUE travels along the Southwest Transitway in order to bypass congestion on Pembina Highway. Passengers can catch the BLUE rapid transit line at Southwest Transitway stations, as well as stops along Graham Avenue and Main Street downtown, and Pembina Highway south of Markham Road.

How many people use Winnipeg Transit? ›

Winnipeg Transit carried 48,770,208 passengers in 2019. On an average weekday, Winnipeg Transit carries over 171,290 passengers. Winnipeg Transit employs 1,560 people, including approximately 1,100 bus operators. About 245 people maintain, repair, and rebuild buses in the shops at Winnipeg Transit.

What does Winnipeg Transit do? ›

Winnipeg Transit is the public transit agency, and the bus-service provider, of the City of Winnipeg, Manitoba.

What is feeder busway? ›

Feeder busway is used to distribute power to loads that are concentrated in one physical area. Industrial applications frequently involve long runs from the power source to a single load. This load may be a large machine, motor control center, panelboard, or switchboard.

What is the difference between trunk bus and feeder bus? ›

Trunk & Feeder Services

These are long bus routes that connect different neighbourhoods or towns across the island, or into the City areas. Feeder services operate around a neighbourhood.

What is the difference between feeder and busbar? ›

A busbar's main task is to conduct enough electricity current. On the other hand, a feeder is a connection between the input terminals and output terminals. Distribution feeders leave the substation through underground cables.

What is a feeder drive? ›

A feeder driver is a commercial driver with 4 or more years of experience, operating trucks and tractor-trailer combinations, including doubles and triples, locally and over-the-road. They safely transport hazardous materials, maintain trip logs, and follow safety procedures.

Top Articles
Latest Posts
Recommended Articles
Article information

Author: Allyn Kozey

Last Updated:

Views: 6122

Rating: 4.2 / 5 (63 voted)

Reviews: 86% of readers found this page helpful

Author information

Name: Allyn Kozey

Birthday: 1993-12-21

Address: Suite 454 40343 Larson Union, Port Melia, TX 16164

Phone: +2456904400762

Job: Investor Administrator

Hobby: Sketching, Puzzles, Pet, Mountaineering, Skydiving, Dowsing, Sports

Introduction: My name is Allyn Kozey, I am a outstanding, colorful, adventurous, encouraging, zealous, tender, helpful person who loves writing and wants to share my knowledge and understanding with you.